New Hantek DSO1102S Handheld Oscilloscope /Multimeter 100MHz 1Gsa/S

Numéro de l'article:DSO1102S
L'article se trouve a Londres .La livraison pour la France dura ca 7-9 jours ouvrables, 3 ans Garantie, manuel en l'anglais.
Nous parlons francais
Achat immédiat: €609.00   Livraison gratuite
Quatité :
         Sous Total: €609.00
Ajouter au panier
Spécifications du fabricant:

New Hantek DSO1102S Handheld Oscilloscope /Multimeter 100MHz 1Gsa/S

New Hantek DSO1102S handheld oscilloscope /multimeter 200MHz 1Gsa/S, isolated level is 1000V CATII,600V CATIII.60MHz-200MHz bandwidth oscilloscope,1GSa/s sample rate,1M memory depth,and 6000 counts DMM with analog bargraph. 5.6 inch TFT Color LCD display£¬high resolution(640*480£©.

DSO1000S series handheld oscilloscope/multimeter included DSO1202S, DSO1152S, DSO1102S,DSO1062S,it is professional tester and with multi-function.What's more,it is easy to operate.A brand-new, unused, unopened, undamaged item in its original packaging. Our products have been exported to more than 40 countries over the world. We believe that during the days of economic and cultural globalization, the key point for running business successfully both at home and abroad is to be creative, considerate,passionate, committed and industrious.

 
Features:

  • Isolated level is 1000V CATII,600V CATIII
  • High bandwidth 60MHz-200MHz oscilloscope,1GSa/s sample rate, and 6000 counts DMM with analog bargraph , and data recorder
  • 1M memory depth
  • High refresh rate (2500 frames)
  • Large 5 6 inch TFT color LCD display£¬high resolution(640*480£©, dual-window design --more clear, more detailed
  • One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
  • Easy-to-use pop-up menu with built-in multi-language help system
  • 23 automatic measurements
  • Waveform math: add, subtract, multiply, and divide
  • Store and recall over
  • Automatic cursor tracking measurements
  • XY mode
  • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
  • Waveform recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
  • Pass-Fail function compares a stored waveform to an unknown input
  • Average mode for smoothing waveforms
  • Square wave output (2V, 1kHz) for probe adjustment
  • USB host/device 2 0 full-speed interface ,support removeable disk, LAN  optional ,easy to control by PC or long-distance
  • Dimensions (mm) is 240(L)x165(W)x50(H), be carried easily
  • Labview\VB\VC  second  design instance 

Closer Look:


 



Specifications:

Brand: Hantek
Gross Weight: 0lb
SKU: STINF-0-0049

 

Model

DSO1202S

DSO1152S

DSO1102S

DSO1062S

                                           &nb sp; Oscilloscope Mode

 

 

 

Vertical

Bandwidth

200MHz

Real-time Sample Rate

1GSa/s

Equivalent Sample Rate

25GSa/s

Record Length (Sample Points)

Single-channel: Maximum 1M; Dual-channel:Maximum 512K

SEC/DIV Range

2nS/div-2000S/div (in a 2, 4, 8 sequence)

A/D Converter

8-bit resolution

VOLTS/DIV Range

2mV/div¡«5V/div at input BNC

Position Range

±50V(5V/div),±40V(2V/div¡«500mV/div),2V(200mV/div¡«50mV/div)±400mV(20mV/div¡«2mV/div)

Rise Time at BNC

       ≤1.7ns

     ≤2.3ns

    ≤3.5ns

   ≤5.8ns

DC Gain Accuracy

±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger

Trigger Sensitivity
(Edge Trigger Type)

DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
EXT£¨Typical£© 200mV from DC to 40MHz
EXT/5£¨Typical£© 1V from DC to 40MHz 
AC: Attenuates signals below 10Hz

HF Reject: Attenuates signals above 80kHz

LF Reject: Attenuates signals below 150kHz

Noise Reject: Reduces trigger sensitivity

Trigger LevelRange

CH1,CH2: ±8 divisions from center of screen
EXT: ±1.2V EXT/5: ±6V

Hold off Range

100ns-10s

Trigger Level Accuracy,typical (Accuracy is for signals having rise and fall times ≥20ns)

CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)



 

Trigger Type

Edge

Trigger on the rising or falling edge

Video

Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)

Slope

Trigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s

Overtime

from the rising or falling edge
Set Time: 20-10s

Alternate

Internal trigger on edge, pulse width, video or slope

Measurement

Cursors

Manual: The difference between voltage cursors ¡÷V; the difference between time cursors ¡÷T; 1/¡÷T calculated by Hz.
Tracing: The voltage and time at a waveform point

Automatic

Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width

 

            Meter mode

 

Max. Resolution

6,000 Counts

DMM Testing Modes

Voltage, Current, Resistance, Capacitance, Diode & Continuity

Max. Input Current

AC: 10A, DC: 10A

Input Impedance

10 MΩ

Isolation

The float voltage between BNC and Ground

600V CATIII, 1000V CAT II

The float voltage between each Channel

600V CATIII, 1000V CAT II

The float voltage between Multimeter and Ground

1000V

between input Ports directly

400V CAT II

Input by 10:1 probe

600V CATIII, 1000V CAT II

The Max input voltage of Multimeter

The float voltage between Multimeter and Ground

Display

Type

Right angle 5.6 16-digit color LCD

Resolution

640*480 dots

Contrast

16 gears, with the progress bar to show adjustment

Interface

USB host and USB slave, LAN Optional

Power

Voltage

DC Input:12--17VDC, 2000mA

Measurement

Size

245 x 163 x 52 (mm)

Weight

0.35kg





Package Includes:


•1 x New Hantek DSO1102S Handheld Oscilloscope /Multimeter 200MHz 1Gsa/S
•1 x Original Package

Donnez votre avis

Dites-nous ce que vous pensez de cet article et partagez vos opinions avec d'autres personnes. S'il vous plaît vous assurer que votre avis ne porte que sur ce point. Tous les commentaires sont modérés et seront réexaminées dans un délai de deux jours ouvrables. commentaires inappropriés ne seront pas affichés.

Après questions-vente et questions: Contactez notre Service Clientèle. (Un représentant clientèle vous contactera pour vous).

S'il vous plaît Inscrivez-vous en premier si vous voulez plus tard modifier ou gérer les commentaires transféré par vous-même.

* Classment:
    Sélectionner les étoiles de la classification svp.
* Votre prénom et nom:
* Votre adresse e-mail:
* Title de votre avis:
* Afficher les avis: