HANTEK Handheld DSO1062BV 60MHz 1GS/s Oscilloscope Built-in Video 2G SD USB DMM

Numéro de l'article:DSO1062BV
L'article se trouve a Londres .La livraison pour la France dura ca 7-9 jours ouvrables, 3 ans Garantie, manuel en l'anglais.
Nous parlons francais
Achat immédiat: €439.00   Livraison gratuite
Quatité :
         Sous Total: €439.00
Ajouter au panier
Spécifications du fabricant:
DSO1000BV Series Handheld Oscilloscope/Multimeter
SC 60MHz-200MHz Bandwidth Oscilloscope,Build in Video Help and 2G SD flash memory,1GSa/s sample rate,1M Memory Depth, and 6000 Counts DMM with analog bargraph.5.6 inch TFT Color LCD Display,High Resolution(640*480)


4. Characteristic(Handheld Oscilloscope/Multimete)

• High Bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
• Build in Video Help and 2G SD flash memory.
• 1M Memory Depth.
• High Refresh Rate (2500 frames)
• Large 5.6 inch TFT Color LCD Display,High Resolution(640*480), Dual-Window Design --More clear, More Detailed
• One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
• Easy-to-use pop-up menu with built-in multi-language help system
• 23 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall over
• Automatic cursor tracking measurements
• XY Mode
• Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
• Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
• Pass-Fail function compares a stored waveform to an unknown input
• Average Mode for smoothing waveforms
• Square Wave Output (2V, 1kHz) for probe adjustment
• USB Host/Device 2.0 full-speed interface ,support removeable disk, LAN Optional ,Easy to control by PC or long-distance.
• Dimensions (mm):240(L)x165(W)x50(H), be carried easily.


5. Hardware Specification

Model

DSO1202BV

DSO1102BV

DSO1062BV

Oscilloscope mode

Bandwidth

200MHz

100MHz

60MHz

Real-time Sample Rate

1GSa/s

Equivalent Sample Rate

25GSa/s

Record Length (Sample Points)

Single-channel: Maximum 1M; Dual-channel: Maximum 512k

SEC/DIV Range

2nS/div-2000S/div (in a 2, 4, 8 sequence)

Delay Time Accuracy

500ps

Video Help                 

Build in

Flash Memory      

Build in 2G SD Card

Vertical

A/D Converter

8-bit resolution

VOLTS/DIV Range

2mV/div5V/div at input BNC

Position Range

±50V(5V/div),±40V(2V/div500mV/div),2V(200mV/div50mV/div)±400mV(20mV/div2mV/div)

Rise Time at BNC

≤1.7ns

≤3.5ns

≤5.8ns

DC Gain Accuracy

±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div

Trigger

Trigger Sensitivity
(Edge Trigger Type)

DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
AC: Attenuates signals below 10Hz

HF Reject: Attenuates signals above 80kHz

LF Reject: Attenuates signals below 150kHz

Noise Reject: Reduces trigger sensitivity

Trigger Level Range

CH1,CH2: ±8 divisions from center of screen

Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns)

CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)

Hold off Range

100ns-10s

Trigger Type

Edge

Trigger on the rising or falling edge

Pulse Width

Trigger (when >,<,=,≠) on positive or negative pulses
Pulse Width Range: 20ns-10s

Video

Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)

Slope

Trigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s

Overtime

from the rising or falling edge
Set Time: 20-10s

Alternate

Internal trigger on edge, pulse width, video or slope

Measurement

Cursors

Manual: The difference between voltage cursors V; the difference between time cursors T; 1/T calculated by Hz.
Tracing: The voltage and time at a waveform point

Automatic(32)

Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH、FRF、FFR、LRR、LRF、LFR、LFF

Meter Mode

Max. Resolution

6,000 Counts

DMM Testing Modes

Voltage, Current, Resistance, Capacitance, Diode & Continuity

Max. Input Voltage

AC: 600V, DC: 800V

Max. Input  Current

AC: 10A, DC: 10A

Input Impedance

10 MΩ

Display

Type

Right angle 5.6 16-digit color LCD

Resolution

640*480 dots

Contrast

16 gears, with the progress bar to show adjustment

Interface

USB host and USB slave, LAN Optional

Power Supply

Voltage

 DC Input:12--17VDC, 1500mA

Mechanical

Size

245 x 163 x 52 (mm)

Weight

1.3KG (exclusive of packing and accessories)



6.Software:

Operating system: Windows 7, Windows NT, Windows 2000, Windows XP ,VISTA

This device is running Linux 2.6, for more detail see


1*oscilloscope machine
2*Oscilloscope Probe
2*Multimeter probe
1*usb cable

1*DC CHARGER
1*CD
1*USER GUIDE



Country

Delivery Time

Working Days (not including holiday)

5-7

8-11

12-14

15-19

20-22

>22

Working Days+ Saturday + Sunday

5-9

10-15

16-20

21-25

26-30

>31

United States

Rate (item arrived )

5.1%

50.1%

29.6%

10.5%

4.7%

Refund

United Kingdom

Rate (item arrived )

9.9%

63.2%

19.1%

3.4%

4.4%

Refund

Australia

Rate (item arrived )

21.4%

50.0%

14.3%

7.2%

7.1%

Refund

France

Rate (item arrived )

10.5%

28.6%

43.8%

10.1%

7.0%

Refund

Germany

Rate (item arrived )

11.1%

22.2%

30.3%

20.9%

15.5%

Refund

Canada

Rate (item arrived )

0.0%

47.1%

31.4%

17.6%

3.9%

Refund

Spain

Rate (item arrived )

3.5%

25%

47.9%

12.9%

10.7%

Refund


Donnez votre avis

Dites-nous ce que vous pensez de cet article et partagez vos opinions avec d'autres personnes. S'il vous plaît vous assurer que votre avis ne porte que sur ce point. Tous les commentaires sont modérés et seront réexaminées dans un délai de deux jours ouvrables. commentaires inappropriés ne seront pas affichés.

Après questions-vente et questions: Contactez notre Service Clientèle. (Un représentant clientèle vous contactera pour vous).

S'il vous plaît Inscrivez-vous en premier si vous voulez plus tard modifier ou gérer les commentaires transféré par vous-même.

* Classment:
    Sélectionner les étoiles de la classification svp.
* Votre prénom et nom:
* Votre adresse e-mail:
* Title de votre avis:
* Afficher les avis: