2M E1/Datacom Transmission Analyzer RY1200A

Numéro de l'article:RY1200A
L'article se trouve a Londres .La livraison pour la France dura ca 7-9 jours ouvrables, 3 ans Garantie, manuel en l'anglais.
Nous parlons francais
Achat immédiat: €649.00   Livraison gratuite
Quatité :
         Sous Total: €649.00
Ajouter au panier
Spécifications du fabricant:
RY1200A 2M Transmission Analyzers is mainly used for measuring of the error rate of

data communication and for the analysis of line fault and causes, and very suitable

for the parameter measurement and routine maintenance testing of 2M system,

N×64K communication channels.


Major Features:

1.English menu. Large screen. Easy operation.

2.Multitask operation (It is allowed to conduct a test while browsing previous records).

3.As many as 9 test settings and 20 groups of test results can be stored, and kept in memory in the event of power failure. .

4.Communication with a PC is available to allow test data storage, analysis and printing to be carried out on the PC, or directly connected to a micro printer.

5.The instrument can be powered on or off at certain times for testing purpose.

6.Column diagram analysis of alarms and error codes;

7.Software updating online.


Major Functions:

·Service-interrupted error code testing;

·Error code testing online;

·Framing and non-framing signals generation and reception;

·2 Mbit/s non-framing error code performance testing;

·2 Mbit/s framing N×64kbit/s channel error code performance testing;

·Performance testing of bit error, coding error, frame error, CRC error and E bit error;

·Alarm testing of signal loss, AIS alarm, frame remote alarm, multiframe remote alarm, out-of-frame, and out-of-pattern synchronism

·Frequency swing testing;

·Line signal level testing;

·Speech channel signal level and frequency testing;

·Pattern slip testing;

·Straightforward signaling

·Audio frequency testing;

·Loop circuit time lag testing;

·Automatic protection switching time testing (APS);

·Sound monitoring;

·Signaling state display. Voice channel content display. Voice channel busy indication;

·Column diagram analysis of alarms and error codes;

·Time sot content analysis;

·Frame content analysis;

·G. 821/G. 826/M. 2100 error code performance analysis;

·Several kinds of error code and alarm insertion;

·Three input modes (terminating, bridging and monitoring);

·Two clock options (internal and picking-up);

·RS-232 interface for printing result;

·Equidirectional 64k testing;

·V.24/RS232, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A data testing.


Technical Index:

2M Technical Index

(1) Signal input rate: 2048kbit/s±100ppm(G.703 requirement±50PPM)

(2) Signal coding: HDB3, AMI.

(3) Input balance response: Attenuation complies with the law of square root of frequency, and is within the range of 0 to 6dB at 1024 kHz.

(4) Input Impedance

(4.1) Unbalance terminating: 75Ω

Balance terminating: 120Ω.

Reflection loss >18dB within 50Hz~3100kHz.

(4.2) Unbalance bridging: >W750Ω

Balance bridging: >W1200Ω

(4.3) Unbalance monitoring: 75Ω, 26dB gain

Balance monitoring: 120Ω, 26dB gain

Reflection loss >18dB within 50Hz~3100kHz.

(5) Signal structure

(5.1) Non-frame structure

(5.2) Frame structure: PCM30, PCM31, PCM30CRC, PCM31CRC

Frame structure complies with the requirement of G. 704.

(6) Testing pattern: 26-1、29-1、211-1、215-1、220-1、223-1, and artificial code

(7) Impedance of output interface:


(7.1) Non-balance 75Ω, up to G. 703

(7.2) Balance 120Ω, up to G. 703.

(8) External clock input

(8.1) Signal form: HDB3, NRZ


(8.2) Balance terminating resistance: 120Ω

Unbalance terminating resistance: 75Ω.

Balance bridging resistance: >1200Ω

Unbalance bridging resistance: >750Ω.



Other Parameters:
·Power supply

(1) Special power adapter

Input: AC220V 50Hz

Output: DC 9V 1A

(2) Internal rechargeable battery

4000mAh, 6V nickel-hydrogen rechargeable battery

Working time: 8 hours

Charging: 8 hours at power-off state, and 12 hours at power-on state.

·Printer: μP40-TS(CH) Chinese character micro-printer with standard level and serial port.

·Dimension :L×W×H: 200×160×42mm

Ambient para meters:

Operation temperature: 0~40℃

Storage Temperature: -30~+70℃

Humidity: 5%~90%, non-condensing



Standard Configuration:

No.

Item

Qty

1

S-19   2M Transmission Analyzers

1 set

Document

2

User’s manual

1 pc

3

CD

1 pc

Bundle Accessories

4

75ΩBNC-J5 testing wire

1 pc

5

RS232 interface wire

1 pc

6

Power adapter

1 pc

7

Portable bag

1 pc

Donnez votre avis

Dites-nous ce que vous pensez de cet article et partagez vos opinions avec d'autres personnes. S'il vous plaît vous assurer que votre avis ne porte que sur ce point. Tous les commentaires sont modérés et seront réexaminées dans un délai de deux jours ouvrables. commentaires inappropriés ne seront pas affichés.

Après questions-vente et questions: Contactez notre Service Clientèle. (Un représentant clientèle vous contactera pour vous).

S'il vous plaît Inscrivez-vous en premier si vous voulez plus tard modifier ou gérer les commentaires transféré par vous-même.

* Classment:
    Sélectionner les étoiles de la classification svp.
* Votre prénom et nom:
* Votre adresse e-mail:
* Title de votre avis:
* Afficher les avis: